![]() ![]() Optional Stream ID that may be required by your streaming provider to uniquely identify the stream. Multiple by 8 to convert to bits, for example 32 = 256bit encryption. Key Length This is the encryption strength to use. This password must be used by both sides for the connection to be established. Specify a password to encrypt the connection. So 20ms would require a latency setting of at least 80 This must be set to the same value on both ends. As a general rule this should be set to at least 4x the ping time destination IP. The higher this value, the better SRT can handle difficult network conditions. Specify the latency of the connection in milliseconds to adapt to network congestion. ![]() This mode allows connecting through most firewalls automatically. The other side must also be set to Rendezvous with an identical port number specified. Rendezvous: Connect to the specified Hostname and Port. Caller: Connect to the specified Hostname and Port. Type Listener: Listen on the specified Port on all network adapters on the computer for connections. From the vMix Settings, go to the Outputs tab and click the cog icon next to the output channel you wish to send. vMix supports HEVC or H264 video and AAC audio (AAC-LC) wrapped in a transport stream only.Progressive video formats are supported only.When using HEVC on Windows 10, the "HEVC Video Extensions" from the Microsoft Store is required to be installed.NOTE: NVIDIA GeForce 9xx series or lower should not be used with SRT, and is unsupported. NVIDIA Quadro P2000 or higher series recommended. Graphics card with support for HEVC and H264 encoding and decoding.Hardware (GPU) accelerated encoding and decoding of HEVC or H264 video in up to 4K (where supported by the underlying hardware and operating system).256 bit encryption through use of PassPhrase.Input and Output (send and receive) support for Caller, Listener and Rendezvous connection methods. ![]() It optimises streaming performance across unpredictable networks, such as the Internet, by dynamically adapting to the real-time network conditions. Secure Reliable Transport is an open source video transport protocol. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |